Show Logging - Cisco Catalyst Blade Switch 3130 Reference Manual

show logging

show logging
Use the show logging privileged EXEC command to display the on-board failure logging (OBFL)
information.
Syntax Description module [switch-number]
clilog
environment
message
temperature
uptime
voltage
continuous
summary
start hh:mm:ss day month
year
end hh:mm:ss day month year (Optional) Display the data up to the specified time and date. For more
detail
| begin
| exclude
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
2-514
show logging onboard [module [switch-number]] {{clilog | environment | message | temperature
| uptime | voltage} [continuous | detail | summary] [start hh:mm:ss day month year] [end
hh:mm:ss day month year]} [ | {begin | exclude | include} expression]
Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
(Optional) Display OBFL information about the specified switches.
On stacking-capable switches, use the switch-number parameter to
specify the switch number, which is the stack member number. If the
switch is a standalone switch, the switch number is 1. If the switch is
in a stack, the range is 1 to 9, depending on the switch member numbers
in the stack.
On nonstacking-capable switches, the switch-number parameter is
always 1.
For more information about this parameter, see the "Usage Guidelines"
section for this command.
Display the OBFL CLI commands that were entered on the standalone
switch or specified stack members.
Display the unique device identifier (UDI) information for the
standalone switch or specified stack members and for all the connected
FRU devices: the product identification (PID), the version
identification (VID), and the serial number.
Display the hardware-related system messages generated by the
standalone switch or specified stack members.
Display the temperature of the standalone switch or specified stack
members.
Display the time when the standalone switch or specified stack
members start, the reason the switch or specified members restart, and
the length of time the standalone switch or specified stack members
have been running since they last restarted.
Display the system voltages of the standalone switch or the specified
switch stack members.
(Optional) Display the data in the continuous file.
(Optional) Display the data in the summary file.
(Optional) Display the data from the specified time and date. For more
information, see the "Usage Guidelines" section.
information, see the "Usage Guidelines" section.
(Optional) Display both the continuous and summary data.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
OL-13271-01