Blade Speed Adjustment; On/Off Safety Switch - Central Machinery 67595 Set Up And Operating Instructions Manual

Blade Speed adjustment

FroM accidental
operation:
turn the power Switch of the
tool to its "oFF" position and
unplug the tool from its
electrical outlet before making
any adjustments to the tool.
1. Remove the Side Panel (38A) and open
the Pulley Cover (17A) to allow access.
2. Use the Belt installation instructions on
page 16 to change the Belt's position to
the desired speed setting.
3. Replace the Side Panel and close the
Pulley Case after changing the speed
setting.
SKU 67595
to preVent
SeriouS injurY
For technical questions, please call 1-800-444-3353.

on/oFF Safety Switch:

To avoid accidental starting by young
children or others not qualified to use
the tool, the use of a Safety Switch is
required.
The Safety Switch has a removable
Key which must be inserted to use the
Switch.
Key Engaged
on
1. To power the bandsaw, insert the Key
into the opening in the Switch and pull
the switch up.
2. To turn off power to the bandsaw, push
the switch down.
Key
Safety Switch
3. When not in use, remove the Key and
store in a safe place out of reach of chil-
dren.
oFF
Page 24