Settings; Blade Guide Adjustment; Table Angle Adjustment - Central Machinery 67595 Set Up And Operating Instructions Manual

SettingS

FroM accidental
operation:
turn the power Switch of the
tool to its "oFF" position and
unplug the tool from its
electrical outlet before making
any adjustments to the tool.

Blade guide adjustment

6B
10B
1. Loosen the Knob (6B) and set the Upper
Support Bracket Post (10B) as close as
possible to the top surface of the mate-
rial being cut.
2. Then, securely tighten the Knob (6B).
SKU 67595
to preVent
SeriouS injurY
For technical questions, please call 1-800-444-3353.

table angle adjustment

Front Side
131B
Back Side
1. Loosen the two Knobs (131B) under-
neath the Table (122B).
2. Tilt the Table (122B) to the left or right
until the Needle points to the desired
angle on the Scale (126B). Then, se-
curely tighten both Knobs (131B).
122B
126B
131B
Page 23