Central Machinery 67595 Set Up And Operating Instructions Manual page 19

Figure For Step 8-3
3. Turn the Micro Adjusting Knob (42B)
counterclockwise 5-10 full turns.
Figure For Step 8-4
4. With both hands, hold the Saw Blade
with its teeth pointing downward and
away from your body. Then, insert the
Saw Blade (56B) back side first through
the slot in the Table (122B).
SKU 67595
42B
teeth point
doWnWard
aS BeloW
inSert SaW
Blade here,
Back FirSt
For technical questions, please call 1-800-444-3353.
Figure For Step 8-5
51B
5. Position the Saw Blade (56B) through
the Upper Blade Guides (19B) and over
the Upper Pulley (51B).
Figure For Step 8-6
90B
6. Place the Saw Blade (56B) on the Lower
Pulley (90B) and through the Lower
Blade Guides (117B).
7. Replace the Table Insert (123B) and
Table Pin (125B).
13B
20B
19B
117B
Page 19