Central Machinery 67595 Set Up And Operating Instructions Manual page 7

4. Check with a qualified electrician or ser-
vice personnel if the grounding instruc-
tions are not completely understood, or
if in doubt as to whether the tool is prop-
erly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and
3-pole receptacles that accept the tool's
plug.
6. Repair or replace damaged or worn cord
immediately.
7. This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated above in 125 V~ 3-prong
plug and outlet. The tool has a ground-
ing plug that looks like the plug illustrated
above in 125 V~ 3-prong plug and
outlet.
8. The outlet must be properly installed and
grounded in accordance with all codes
and ordinances.
9. Do not use an adapter to connect this
tool to a different outlet.
SKU 67595 For technical questions, please call 1-800-444-3353. Page 7