Phase 8: Saw Blade Installation - Central Machinery 67595 Set Up And Operating Instructions Manual

Figure For Step 7-2
57/66B
24B
2. Loosen the Hex Head Bolt (11B) on
the side of the Upper Support Bracket
Post (10B). Slide the Upper Blade
Guard (24B) up into the Upper Covers
(57B/66B) and then the Upper Support
Bracket Post (10B) onto the end of the
Guide Post (5B). Align the Upper Sup-
port Bracket Post (10B) and tighten the
Bolt (11B) to secure it.
SKU 67595
11B
10B
For technical questions, please call 1-800-444-3353.

phaSe 8: Saw Blade installation

5B
6B
Figure For Step 8-1
1. Fully open the Upper Front Cover (66B)
and the Lower Front Cover (94B) .
Figure For Step 8-2
2. Remove the Table Insert (123B) and
Table Pin (125B).
to preVent injurY
FroM Sharp Blade:
Wear heavy duty work gloves
and anSi-approved safety
goggles during assembly,
especially when handling blade.
66B
94B
taBle inSert (123B)
taBle pin (125B)
Page 18