ZyXEL Communications P-660HW-Tx v3 User Manual page 35

Table 3 Navigation Panel Summary
LINK TAB
Firewall General
Rules
Threshold
Content Filter Keyword
Schedule
Trusted
Packet Filter
Certificates Trusted CAs
Advanced
IP
Passthrough
Static Route
VLANs Group Setting
Port Setting
QoS General
Class Setup
Queue Setup
Monitor
Dynamic DNS
Remote WWW
MGMT
Telnet
FTP
P-660HW-Tx v3 User's Guide
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to activate/deactivate the firewall or set the
firewall level.
This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
This screen appears when you choose Custom from the Firewall
> General screen.
Use this screen to configure the thresholds for determining when
to drop sessions that do not become fully established.
Use this screen to block access to web sites containing certain
keywords in the URL.
Use this screen to set the days and times for your device to
perform content filtering.
Use this screen to exclude a range of users on the LAN from
content filtering.
Use this screen to configure the rules for protocol and generic
filter sets.
Use this screen to save CA certificates to the ZyXEL Device.
Use this screen to enable IP Passthrough so one of your clients
can share the same public IP address as the WAN side.
Use this screen to configure IP static routes to tell your device
about networks beyond the directly connected remote nodes.
Use this screen to activate 802.1Q/1P, specify the management
VLAN group, display the VLAN groups and configure the settings
for each VLAN group.
Use this screen to configure the PVID and assign traffic priority for
each port.
Use this screen to enable QoS and traffic prioritizing, and
configure bandwidth management on the WAN.
Use this screen to define a classifier.
Use this screen to configure QoS queues.
Use this screen to view each queue's statistics.
This screen allows you to use a static hostname alias for a
dynamic IP address.
Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the ZyXEL
Device.
Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the ZyXEL
Device.
Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyXEL
Device.
35