Chapter 4 Tutorials
4.2.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
SSID
Security Mode
Pre-Shared Key
802.11 Mode
Click Network > Wireless LAN to open the AP screen. Configure the screen
1
using the provided parameters (see
Note: To see the default SSID, check the sticker on the rear panel of your ZyXEL
Device. To see the current SSID, go to the Status screen.
48
eircom07390946
WPA-PSK
DoNotStealMyWirelessNetwork
Mixed
page
48). Click Apply.
P-660HW-Tx v3 User's Guide