ZyXEL Communications P-660HW-Tx v3 User Manual page 316

Chapter 21 Logs
Table 91 System Maintenance Logs (continued)
LOG MESSAGE
Successful HTTPS login
HTTPS login failed
Table 92 System Error Logs
LOG MESSAGE
%s exceeds the max.
number of session per
host!
setNetBIOSFilter: calloc
error
readNetBIOSFilter: calloc
error
WAN connection is down.
Table 93 Access Control Logs
LOG MESSAGE
Firewall default policy: [ TCP |
UDP | IGMP | ESP | GRE | OSPF ]
<Packet Direction>
Firewall rule [NOT] match:[ TCP
| UDP | IGMP | ESP | GRE | OSPF
] <Packet Direction>, <rule:%d>
Triangle route packet forwarded:
[ TCP | UDP | IGMP | ESP | GRE |
OSPF ]
Packet without a NAT table entry
blocked: [ TCP | UDP | IGMP |
ESP | GRE | OSPF ]
Router sent blocked web site
message: TCP
316
DESCRIPTION
Someone has logged on to the router's web
configurator interface using HTTPS protocol.
Someone has failed to log on to the router's web
configurator interface using HTTPS protocol.
DESCRIPTION
This attempt to create a NAT session exceeds the
maximum number of NAT session table entries allowed to
be created per host.
The router failed to allocate memory for the NetBIOS
filter settings.
The router failed to allocate memory for the NetBIOS
filter settings.
A WAN connection is down. You cannot access the
network through this interface.
DESCRIPTION
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched the default policy and was blocked or
forwarded according to the default policy's
setting.
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access
matched (or did not match) a configured firewall
rule (denoted by its number) and was blocked or
forwarded according to the rule.
The firewall allowed a triangle route session to
pass through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The router sent a message to notify a user that
the router blocked access to a web site that the
user requested.
P-660HW-Tx v3 User's Guide