ZyXEL Communications P-660HW-Tx v3 User Manual page 335

Chapter 22 Update/Reboot
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.254). See Appendix A on page 361 for details on how to set
up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 131 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 132 Reset Warning Message
Figure 133 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to Section 1.6 on page 27 for more
information on using the RESET button.
335
P-660HW-Tx v3 User's Guide