Main Window; Status Bar - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 2 Introducing the Web Configurator
Table 3 Navigation Panel Summary
LINK TAB
DNS
ICMP
UPnP General
Maintenance
System General
Time Setting
Logs View Log
Log Settings
Update/ Firmware
Reboot
Configuration
Restart
Diagnostic General
Statistics General

2.2.3 Main Window

The main window displays information and configuration fields. It is discussed in
the rest of this document.
Right after you connect to the URL, the Status screen is displayed. See
on page 37

2.2.4 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration
has been updated.
36
FUNCTION
Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyXEL
Device.
Use this screen to set whether or not your device will respond to
pings and probes for services that you have not made available.
Use this screen to turn UPnP on or off.
Use this screen to configure your device's name, domain name,
management inactivity timeout and password.
Use this screen to change your ZyXEL Device's time and date.
Use this screen to display your device's logs.
Use this screen to select which logs and/or immediate alerts your
device is to record. You can also set it to e-mail the logs to you.
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
This screen allows you to reboot the ZyXEL Device without turning
the power off.
Use this screen to test the connections to other devices.
These screen displays information to help you identify problems
with the DSL and Ethernet WAN connection.
for more information about the Status screen.
Chapter 3
P-660HW-Tx v3 User's Guide