Configuring The Www Screen - ZyXEL Communications P-660HW-Tx v3 User Manual

18.2.1 Configuring the WWW Screen

Click Advanced > Remote MGMT to display the WWW screen.
Figure 110 Advanced > Remote Management > WWW
The following table describes the labels in this screen.
Table 80 Advanced > Remote Management > WWW
LABEL
Port
Access Status
Secured Client
IP
Create a
dynamic
firewall rule to
permit WAN
access
Apply
Cancel
P-660HW-Tx v3 User's Guide
DESCRIPTION
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the ZyXEL Device using this service.
Select this check box if you want to create a dynamic firewall rule to
permit WAN access.
This option is available only when you set the Access Status as ALL,
WAN, WLAN&WAN, or LAN&WAN.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 Remote Management
283