ZyXEL Communications P-660HW-Tx v3 User Manual page 50

Chapter 4 Tutorials
The wireless LAN of the ZyXEL Device is enabled by default, so the LED lights
4
green. If not, press the WIFI button for 5 to 6 seconds and release it when the
LED turns green. The wireless LAN is on. Then press the WIFI button for 1 to 2
seconds and release it when the LED is blinking orange.
Alternatively, you may log into ZyXEL Device's web configurator and click the
5
Push Button in the Network > Wireless LAN > WPS Station screen.
Note: Your ZyXEL Device has a WIFI button located on its rear panel as well as a
WPS button in its configuration utility. Both buttons have exactly the same
function: you can use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second
button within 120 seconds of pressing the first one.
When the ZyXEL Device is sending the configuration settings to the wireless client,
6
the WiFi LED blinks orange. This may take up to two minutes. Then the WiFi LED
becomes green when the wireless client is able to communicate with the ZyXEL
Device securely. (You can refer to
on activating WPS.)
50
Section 1.7.2 on page 28 for more information
P-660HW-Tx v3 User's Guide