4.3 Setting Up Multiple Wireless Groups
Company A wants to create different wireless network groups for different types of
users as shown in the following figure. Each group has its own SSID, security
mode and QoS control.
• Employees in Company A will use a general
group.
• Higher management level and important visitors will use the VIP group, which
has the highest QoS control.
• Visiting guests will use the Guest group, which has a lower security mode and
QoS control.
Company A will use the following parameters to set up the wireless network
groups.
SSID
Security Mode
Pre-Shared Key
QoS
P-660HW-Tx v3 User's Guide
Company
VIP
COMPANY
eircom07390946
WPA2-PSK
ForCompanyOnly
Default
Guest
eircom07390946
VIP
GUEST
VIP
Guest
WPA2-PSK
Static WEP
ForVIPOnly
Guest
Highest
Low
Chapter 4 Tutorials
wireless network
55