Canon FY8-13HW-000 Service Manual page 99

Network multi-pdl printer
Table of Contents

Advertisement

CHAPTER 4 SERVICE PROCEDURE
5.1 Installing system software
The System Software CD includes the system software and fonts. Use the System Soft-
ware CD when:
• You replace the HDD
• You update to a more recent version of the system software
If you change langnage, perform the "Factory Default" in setup menu.
System software installation takes approximately 20 minutes.
Memo
5.1.1 TO INSTALL SYSTEM SOFTWARE
1. If you have not done so already, first give the network administrator the opportunity to
print the Job Log and to save any custom simulations. Also, print the following from the
Functions menu (if possible):
• Configuration page—records the customer's current Setup configuration. The Setup
configuration will be reset to the default configuration when system software is in-
stalled.
• Font Lists—the PS and PCL Font lists detail the fonts currently installed on the HDD.
These include the original fonts that came installed on the iR-M2 plus any additional
fonts that the customer may have installed. All fonts are deleted when you install sys-
tem software. The network administrator can use Fiery Downloader to reinstall cus-
tomer-supplied fonts after system software reinstalls the original fonts. To determine
which customer-supplied fonts need to be reinstalled, print the Font List before you in-
stall system software and again after you install system software. Any fonts not listed
after installation need to be reinstalled.
2. Insert the system software CD in the CD-ROM drive.
If you installed a new HDD, power on the system using the power switch
on the back panel, insert the system software CD in the CD-ROM drive, al-
low the system to boot, and then proceed to step 5 on page 4-57.
Memo
3. Select Shut Down from the Functions menu (see page 4-3).
4. At the next screen, select Reboot System.
Allow the system to shut down and reboot. Routine startup diagnostics appear on the
Control Panel while the system reboots.
4-56
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unit-m2Imagepass-m2

Table of Contents