Canon FY8-13HW-000 Service Manual page 107

Network multi-pdl printer
Table of Contents

Advertisement

CHAPTER 5 TROUBLESHOOTING
Conditions to verify
• All replaceable parts are:
• Present
• Properly aligned
• Installed securely
• The correct part for the system
• Properly configured, if configurable (such as
HDD jumper)
• Appear undamaged
• Chassis and contents have not been tampered with
(no unauthorized additions or changes have been
made)
• Chassis does not contain any foreign objects
• Motherboard, including components and traces, ap-
pears undamaged and no foreign objects are evident
• CPU is present, well-seated, and appears undam-
aged
• CPU cooling unit is well-aligned and firmly at-
tached
• Each fan required (including fan cable) is well-posi-
tioned (not upside down), installed in the correct
connector, and appears undamaged
• Boards required on the motherboard are present,
well-seated, and in the correct slots
• Each DIMM is well-seated
• Battery is installed
• DIMM is well-seated
• DIMM connector is not oxidized
Each board required is:
• Present
• Installed in the correct slot
• Well-seated
• Appears undamaged
Required cables (if applicable) are:
• Present
• Firmly connected in the correct connectors
• Appear undamaged
5-6
T05-102-02 Verifying the system
COPYRIGHT © 2002 CANON INC.
Part and additional page references
Chassis
Motherboard, page 4-23
DIMM for iR-M2, page 4-29
Copier interface board, page 4-17
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unit-m2Imagepass-m2

Table of Contents