Table of Contents
Advertisement
b. TO PRINT A CONFIGURATION PAGE
1. If you have not done so already, power on the copier and allow it to warm up. Power on
the iR-M2 using the power switch on the back panel.
Messages appear on the Control Panel as the iR-M2 runs through its startup diagnostics.
2.
Make sure that the copier is not in use and that the Info screen on the iR-M2 Control
Panel reads Idle.
3. At the Idle screen, press the Menu button once (see "Using the Control Panel" on page
3-8). The Functions menu appears.
4. Press the line selection button to the right of Print Pages, and then select Configuration
page.
The iR-M2 sends the Configuration page to the copier and displays the RIP and Print
status screens so you can monitor the job.
COPYRIGHT © 2002 CANON INC.
Use the Up and Down buttons to
scroll through these options. Use
the line selection buttons to the
right to select Print Pages.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 3 CONNECTING THE iR-M2
3-5
Advertisement
Table of Contents
