Table of Contents
Advertisement
CHAPTER 3 CONNECTING THE iR-M2
a. TO PRINT THE TEST PAGES
1. Power on the copier and allow it to warm up.
The iR-M2 starts automatically when you power on the copier. Wait as the iR-M2 runs
through its startup diagnostics.
2. At the Idle screen, press the Menu button once (see "Using the Control Panel" on page
3-8). The Functions menu appears.
3. Press the line selection button to the right of Print Pages. and then select PS Test Page.
The iR-M2 sends the PS Test Page to the copier.
4. Press the line selection button to the right of Print Pages. and then select PCL Test Page.
The iR-M2 sends the PCL Test Page to the copier.
5. Examine the quality of the Test Pages.
The Test Pages confirm that the iR-M2 is functional and that the connection between the
iR-M2 and the copier is good. When you examine the Test Pages, keep in mind that:
• All patches should be visible, even though they may be very faint in the 5% and 2%
range.
• Each patch set should show uniform gradation from patch to patch as the shade light-
ens from 100% to 0%.
Poor image quality may indicate a need to service the copier. For more information, see
the documentation provided with the copier.
3-4
Use the Up and Down buttons to
scroll through these options. Use
the line selection buttons to the
right to select Print Pages.
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
Advertisement
Table of Contents
