Table of Contents
Advertisement
Symptom
Startup (con't)
System hangs at screen
System hangs at any of
these screens
T05-104-04 iR-M2 error messages and conditions (Continued)
COPYRIGHT © 2002 CANON INC.
Possible cause
Possibly one of the follow-
ing:
• Corrupt system software
• Faulty HDD
Possibly one of the follow-
ing:
• Corrupt system software
• Faulty HDD
• Faulty motherboard
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
CHAPTER 5 TROUBLESHOOTING
Suggested action
1. Check again all cables and connec-
tions.
2. If the problem persists, reinstall sys-
tem software (see page 4-56).
Corrupt system software may cause
the system to hang at this screen.
3. If the problem still persists, replace the
HDD (see page 4-47).
If replacing the HDD does not correct
the problem, make sure you install the
old HDD back in the iR-M2.
4. Check again all cables and connec-
tions.
5. If the problem persists, reinstall system
software (see page 4-56).
Corrupt system software may cause
the system to hang at this screen.
6. If the problem still persists, replace the
HDD (see page 4-47).
If replacing the HDD does not correct
the problem, install the old HDD back
in the system.
7. If the problem persists, verify CPU
and CPU fan connection. If the prob-
lem persists, you may need to replace
the CPU (see page 4-32).
8. If the problem still persists, you may
need to replace the motherboard (see
page 4-26).
If replacing the motherboard does not
correct the problem, make sure you
install the old motherboard back in the
iR-M2.
5-15
Advertisement
Table of Contents
