Table of Contents
Advertisement
3) Turn the connected device ON.
4) Connect the power cable [1] to the main
unit.
5) Turn the main unit [1] ON.
6) When 'Select Language' has appeared, select the appropriate language.
7) When 'Select Market Region' has appeared, select the appropriate region.
8) See that the setup menu starts automatically. At least, select the following in sequence to
store data: 'Server Setup', 'Network Setup, 'Printer Setup' For instance, when you select
settings for 'Server Setup' the screen will appear at the end asking you whether you want
to store the changes. Selecting 'Yes' will store the settings in question.
9) Select 'Exit Setup' from the 'Setup' menu. (The machine will re-start automatically.)
10) If you set up the DNS setup in Network Setup, turn Off and On a copier after main unit
indicates "Idle".
11) Generate a PS Test page and a Configuration page as follows, and check to see that the
output is normal.
Function>Print Pages>PS Test Page/Configuration.
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
[1]
F0A-304-03
[1]
F0A-304-04
APPENDIX
A-9
Advertisement
Table of Contents
