Table of Contents
Advertisement
APPENDIX
6) Remove the screws [1] (2), and remove
the blanking plate 1 [2].
7) Fix the network PCB [1] with the
screws for attaching the blanking plate
1 [2] (2).
Make sure that the connector is
inserted properly.
8) Push the main controller box (pulled
out in Procedure 5)) in, and fix it with
screws (4).
9) Attach the rear right cover removed in
Procedure 3).
10) Attach the interface cable removed in
Procedure 2).
11) Attach the rear cover removed in Proce-
dure 1).
A-6
COPYRIGHT © 2002 CANON INC.
[1]
F0A-302-05
F0A-302-06
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
[2]
[1]
[2]
Advertisement
Table of Contents
