Canon MultiPASS F30 Quick Start Manual
Canon multipass f30: quick start
Hide thumbs
Also See for MultiPASS F30:
- User manual (64 pages) ,
- Reference manual (58 pages) ,
- Specification (2 pages)
Related Manuals for Canon MultiPASS F30
Summary of Contents for Canon MultiPASS F30
- Page 1 Step 1: Unpack the F30 MFP 1. Carefully remove all items from the box. Step 2: Set up the F30 MFP 1. Remove shipping tape and protective shipping materials.
- Page 2 2. Open the scanning unit by pressing the Open button. Remove the shipping material. 3. Unlock the scanner. Set the scanning lock to unlock. Press the scanning unit closed until it clicks. 4. Attach the trays:...
- Page 3 Step 3: Prepare the F30 MFP 1. Connect the power cord and plug it into a socket. 2. If the F30 MFP does not power up when plugged in, press the ON/OFF button to turn it on. 3. Open the scanning unit again. The printhead holder will move to the center position. IMPORTANT: Remove the tape on the printhead holder lever.
- Page 4 2. Turn the printhead over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. 3. Raise the gray lock lever. 4. Gently slide the printhead into the holder. The printhead will rest at a slight angle. Do not press it down.
- Page 5 Step 5: Install the Ink Tanks 1. Pull the orange tab off the yellow ink tank (BCI-3eY), then remove and discard the plastic wrapper. 2. Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of the ink tank. 3.
- Page 6 2. Once the printhead has been installed ALIGN PRINTHEAD/PRESS SET KEY will display on the LCD panel. Press the key once. 3. The F30 MFP will print a vertical line pattern, and the LCD message will change to:. 4. Review the vertical pattern printout, noting which box in Column A prints with the most solid image.
- Page 7 7. Review the lateral pattern printout, noting which solid box in Column G on the printout has the most solid image. For the G column printed pattern, use the keys to scroll to the value with the most solid box in the column. NOTE: If you have difficulty on Column G when choosing between two patterns, use the smaller value number.
- Page 8 6. Read the License Agreement. If you agree to its terms, click YES. If you do not agree, click NO. You will not be allowed to continue the installation process. 7. Select the MultiPASS F30 for installation. Continue to follow the on-screen instructions.
- Page 9 9. Continue to follow on-screen instructions to complete the installation process. 10. When installation is complete, you will need to restart your PC before using the MultiPASS Suite software. If your PC does not restart automatically, restart it manually. NOTE: Remember to register your product to ensure product support. The serial number is located on the back of the F30 MFP, above the parallel port.
- Page 10 If you agree to its terms, click YES. If you do not agree, click NO. You will not be allowed to continue the installation process. 8. Select the MultiPASS F30 for installation. Continue to follow the on-screen instructions. 9. When installation is complete, you will need to restart your PC before using the MultiPASS Suite software.