Table of Contents
Advertisement
CHAPTER 4 SERVICE PROCEDURE
7. Match the grooves on the top edge of the side panel with the top of the iR-M2 and then
lower the side panel onto the chassis.
8. Press down on the bottom edge of the side panel until the hooks click into the slots on
the bottom of the chassis.
Do not leave the access panel off after servicing. An airflow channel is cre-
ated by the panel and the fans. Leaving the iR-M2 open could reduce the
operational life expectancy of internal components.
Memo
Top of iR-M2
Groove on top
edge of side
panel (1 of3)
9. Connect any cables removed during service to the back of the iR-M2.
4-14
F04-303-02 Replacing the side panel
COPYRIGHT © 2002 CANON INC.
Bottom edge of
side panel
Hook (1 of 2)
Slot on bottom
chassis (1 of 2)
2000 2000 2000 2000
NM-PDL REV.0 JULY 2002
Advertisement
Table of Contents
