Web: Configuring Ip Addressing; How Ip Addressing Affects Switch Operation - SMC Networks SMC6624M Management Manual

Configuring IP Addressing, Time Synchronization, Interface Access, and System Information
IP Configuration
Configure the Optional Default Gateway. You can assign one default
gateway to the switch.
Syntax: ip default-gateway <ip-address>
For example:
SMC6624M(config)# ip default-gateway 11.28.227.115
You can execute this command only from the global configuration level.
Configure Time-To-Live (TTL). This command sets the time that a packet
outbound from the switch can exist on the network. The default setting is 64
seconds.
Syntax:
SMC6624M(config)# ip ttl 60
In the CLI, you can execute this command only from the global configuration
level. The TTL range is 2 - 255 seconds.

Web: Configuring IP Addressing

You can use the web browser interface to access IP addressing only if the
switch already has an IP address that is reachable through your network.
1.
2.

How IP Addressing Affects Switch Operation

Without an IP address and subnet mask compatible with your network, the
switch can be managed only through a direct terminal device connection to
the Console RS-232 port. You can use direct-connect console access to take
advantage of features that do not depend on IP addressing. However, to realize
the full performance capabilities proactive networking offers through the
switch, configure the switch with an IP address and subnet mask compatible
with your network. The following table lists the general features available with
and without a network-compatible IP address configured.
5-8
ip ttl <number-of-seconds>
Click on the Configuration tab.
Click on [IP Configuration].