Cli: Configuring Vlan Parameters - SMC Networks SMC6624M Management Manual

Ports 4 and 5 are
assigned to both
VLANs.
Ports 6 and 7 are
assigned only to
VLAN-22.
All other ports are
assigned only to the
Default VLAN.
Figure 9-49. Example of VLAN Assignments for Specific Ports
3.

CLI: Configuring VLAN Parameters

In the factory default state, all ports on the switch belong to the default VLAN
(DEFAULT_VLAN) and are in the same broadcast/multicast domain. (The
default VLAN is also the default primary VLAN—see "Which VLAN Is Pri-
mary?" on page 9-50.) You can configure up to 29 additional static VLANs by
adding new VLAN names, and then assigning one or more ports to each VLAN.
(The switch accepts a maximum of 30 VLANs, including the default VLAN and
any dynamic VLANs the switch creates if you enable GVRP—page 9-73.) Note
that each port can be assigned to multiple VLANs by using VLAN tagging. (See
"VLAN Tagging Information" on page 9-66.)
For information on VLAN tags ("Untagged" and "Tagged"), refer to
"VLAN Tagging Information" on page 9-66.
d. If you are finished assigning ports to VLANs, press [Enter] and then
[S] (for Save) to activate the changes you've made and to return to the
Configuration menu. (The console then returns to the VLAN menu.)
Return to the Main menu.
Configuring Advanced Features
Port-Based Virtual LANs (Static VLANs)
9-59