SMC Networks SMC6624M Management Manual page 42

Using the Command Line Interface (CLI)
Using the CLI
Typing ? at the Manager level produces this listing:
SMC6624M# ?
-- MORE --
Figure 3-4. Example of the Manager-Level Command Listing
When - - MORE - - appears, there are more commands in the listing. To list the
next screenfull of commands, press the Space bar. To list the remaining
commands one-by-one, repeatedly press [Enter].
Typing ? at the Global Configuration level or the Context Configuration level
produces similar results.
Use [Tab] To Search for or Complete a Command Word. You can use
[Tab] to help you find CLI commands or to quickly complete the current word
in a command. To do so, press [Tab] immediately after typing the last letter of
the last keyword in the CLI (with no spaces allowed). For example, at the
Global Configuration level, if you press [Tab] immediately after typing "t," the
CLI displays the available command options that begin with "t." For example:
SMC6624M(config)# t[Tab]
telnet-server
time
trunk
telnet
SMC6624M(config)# t
3-8
boot Reboot the device
configure Enter the Configuration context
copy Copy datafiles to/from the switch
end Return to the Manager Exec context
erase Erase configuration file stored in flash
getMIB Retrieve and display the MIB objects specified
kill Kill all other active telnet/console sessions
log Display log events
page Toggle paging mode
print Execute command and redirect its output
redo Re-execute a command from history
reload Warm reboot of the switch
repeat Repeat execution of the previous command
clear Reset sundry statistics
setMIB Set the value of a MIB object
setup Set up initial configuration for the switch
telnet Initiate an outbound telnet session
terminal Set the dimensions of the terminal window
update Enter ROM monitoring mode
walkMIB Display MIB objects and values
write View or save the running configuration of the switch
When - - MORE - - appears, use
the Space bar or [Return] to list
additional commands.