Vlan Information - SMC Networks SMC6624M Management Manual

VLAN Information

The switch uses the CLI to display the following VLAN status:
Show Command
show vlan
show vlan <vlan-id>
For example, suppose that your switch has the following VLANs:
Ports VLAN
1 - 12 DEFAULT_VLAN
1, 2 VLAN-33
3, 4 VLAN-44
The next three figures show how you could list data on the above VLANs.
Listing the VLAN ID (VID) and Status for ALL VLANs in the Switch.
SMC6624M# show vlan
Status and Counters - VLAN Information
VLAN support : Yes
Maximum VLANs to support : 9
Primary VLAN : DEFAULT_VLAN
802.1Q VLAN ID Name
-------------- ------------- -------------
1 DEFAULT_VLAN
33 VLAN-33
44 VLAN-44
Figure 10-13.Example of VLAN Listing for the Entire Switch
Monitoring and Analyzing Switch Operation
Output
Lists:
• Maximum number of VLANs to support
• Existing VLANs
• Status (static or dynamic)
• Primary VLAN
For the specified VLAN, lists:
• Name, VID, and status (static/dynamic)
• Per-Port mode (tagged, untagged, forbid, no/auto)
• "Unknown VLAN" setting (Learn, Block, Disable)
• Port status (up/down)
VID
1
33
44
Status
Static
Static
Static
Status and Counters Data
10-17