Configuring IP Addressing, Time Synchronization, Interface Access, and System Information
SMC6624M(config)# console terminal vt100 baud 19200 flow-control none inactivity
-timer 10 events critical
Command will take effect after saving configuration and reboot.
SMC6624M(config)# write memory
SMC6624M(config)# reload
Figure 5-21. Example of Executing the Console Command with Multiple
Parameters
You can also execute a series of console commands and then save the
configuration and boot the switch. For example:
Configure
SMC6624M(config)# console baud speed-sense
the
Command will take effect after saving configuration and reboot.
individual
SMC6624M(config)# console flow-control xon/xoff
parameters.
Command will take effect after saving configuration and reboot.
SMC6624M(config)# console inactivity-timer 0
Command will take effect after saving configuration and reboot.
Save the
SMC6624M(config)# write memory
changes.
SMC6624M(config)# reload
Boot the
switch.
Figure 5-22. Example of Executing a Series of Console Commands
Interface Access: Console/Serial Link, Web, and Inbound Telnet
The switch implements the Event Log change immediately. The switch implements
the other console changes after executing
write memory
reload
and
.
5-39