SMC Networks SMC6624M Management Manual page 73

Configuring IP Addressing, Time Synchronization, Interface Access, and System Information
To Configure IP Addressing.
1.
N o t e
If multiple VLANs are configured, a screen showing all VLANs appears instead
of the following screen.
For descriptions of these
parameters, see the
online Help for this
screen.
Before using the DHCP/
Bootp option, refer to
"DHCP/Bootp
Operation" on page 5-9.
Figure 5-1. Example of the IP Service Configuration Screen without Multiple
VLANs Configured
2.
3.
4.
5.
From the Main Menu, Select.
2. Switch Configuration ...
5. IP Configuration
Press [E] (for Edit).
If the switch needs to access a router, for example, to reach off-subnet
destinations, select the Default Gateway field and enter the IP address of
the gateway router.
If you need to change the packet Time-To-Live (TTL) setting, select Default
TTL and type in a value between 2 and 255 (seconds).
Do one of the following:
• If you want to have the switch retrieve its IP configuration from a
DHCP or Bootp server, at the IP Config field, keep the value as DHCP/
Bootp and go to step 8.
IP Configuration
5-5