SMC Networks SMC6624M Management Manual page 273

Enabling and Disabling GVRP on the Switch. This command enables
GVRP on the switch.
Syntax:
This example enables GVRP:
SMC6624M(config)# gvrp
This example disables GVRP operation on the switch:
SMC6624M(config)# no gvrp
Enabling and Disabling GVRP On Individual Ports. When GVRP is
enabled on the switch, use the unknown-vlans command to change the
Unknown VLAN field for one or more ports. You can use this command at
either the Manager level or the interface context level for the desired port(s).
Syntax:
N o t e
For port interface commands such as unknown-vlans, the command line
accepts only one parameter at a time (instead of combining several in one
command).
For example, to view and change the configuration for ports 1-2 to Block:
SMC6624M(config)# show gvrp
SMC6624M (config)# interface 1-2 unknown-vlans block
gvrp
show gvrp
interface <port-list> unknown-vlans
<learn | block | disable>
GVRP support
Maximum VLANs to support : 8
Primary VLAN : DEFAULT_VLAN
GVRP Enabled : Yes
Port Type | Unknown VLAN
---- --------- + ------------
1 10/100TX | Learn
2 10/100TX | Learn
. . | .
. . | .
. . | .
Configuring Advanced Features
Shows the current settings.
Changes the Unknown VLAN
field setting for the specified
port(s).
GVRP
9-83