SMC Networks SMC6624M Management Manual page 274

Configuring Advanced Features
GVRP
Displaying the Static and Dynamic VLANs Active on the Switch. The
show vlans command lists all VLANs present in the switch.
Syntax:
For example, in the following illustration, switch "B" has one static VLAN (the
default VLAN), with GVRP enabled and port 1 configured to Learn for
Unknown VLANs. Switch "A" has GVRP enabled and has three static VLANs:
the default VLAN, VLAN-222, and VLAN-333. In this scenario, switch B will
dynamically join VLAN-222 and VLAN-333:
The show vlans command lists the dynamic (and static) VLANs in switch "B".
Switch-B> show vlans
Figure 9-64. Example of Listing Showing Dynamic VLANs
9-84
show vlans
Switch "A"
GVRP enabled.
3 Static VLANs:
– DEFAULT_VLAN
– VLAN-222
– VLAN-333
Status and Counters - VLAN Information
VLAN support : Yes
Maximum VLANs to support : 8
Primary VLAN : DEFAULT_VLAN
802.1Q VLAN ID Name
-------------- ------------- -------------
1 DEFAULT_VLAN
222 GVRP_222
333 GVRP_333
Dynamic VLANs
Learned from
Switch "A"
through Port 1
Status
Static
Dynamic
Dynamic
Switch "B"
GVRP enabled.
1 Static VLANs:
– DEFAULT_VLAN