SMC Networks SMC6624M Management Manual page 226

Tigerstack ii 10/100 stackable fast ethernet switch
Hide thumbs Also See for SMC6624M:
Table of Contents

Advertisement

Configuring Advanced Features
Stack Management
Using the Commander's CLI To Manually Add a Candidate to the
Stack. To manually add a candidate, you will use:
I
I
For example:
SMC6624M(config)# show stack view
In this stack, the only SNs in use are 0 and 1,
so you can use any SN number from 2 through
15 for new Members. (The SN of "0" is always
reserved for the stack Commander.)
Figure 9-28. Example of How To Determine Available Switch Numbers (SNs)
To display all discovered Candidates with their MAC addresses, execute show
stack candidates from the Commander's CLI. For example, to list the discov-
ered candidates for the above Commander:
SMC6624M(config)# show stack candidates
MAC addresses
of discovered
Candidates.
Figure 9-29. Example of How To Determine MAC Addresses of Discovered
Candidates
Knowing the available switch numbers (SNs) and Candidate MAC addresses,
you can proceed to manually assign a Candidate to be a Member of the stack:
Syntax: stack member <switch-number> mac-address <mac-addr>
9-36
A switch number (SN) to assign to the new member. Member SNs range
from 1 to 15. To see which SNs are already assigned to Members, use show
stack view. You can use any SN not included in the listing. (SNs are
viewable only on a Commander switch.)
The MAC address of the discovered Candidate you are adding to the stack.
To see this data, use the show stack candidates listing .
Stack Members
SN MAC Address
System Name
-- ------------- ---------------- ----------- -------------------------
0
0030c1-7fcc40 SMC6624M
1
0060b0-880a80 Indian Ocean
Stack Candidates
Candidate MAC System Name
------------- ------------------------- -----------
0030c1-b24ac0 North Sea
0060b0-df1a00 DEFAULT_CONFIG
[password <password-str>]
Device Type Status
SMC 10/100 Commander Up
SMC 10/100 Member Up
Note: When manually adding a switch, you must assign an SN.
However, if the Commander automatically adds a new Member,
it assigns an SN from the available pool of unused SNs.
Device Type
SMC 10/100
SMC 10/100

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6624fmst6624glsc6624gssc6624gt6624m6624s

Table of Contents