Cadillac BLS Owner's Manual page 221

460_OM_MY09.book Page 221 Wednesday, April 2, 2008 10:32 AM
Jacking points for a trolley jack
3 Wind the jack up to a suitable height
before placing it under the jacking point.
Each jacking point is indicated by an
arrow on the sill (see illustration).
Make sure that the jack fully engages
the jacking point in the underside of the
sill member and that the entire foot of the
jack is steady and flat on the ground.
The jack must not stand on snow, ice or
similar.
Wind up the jack until it just begins to lift
the car.
Plastic covers and removal tool
4 Wind the jack to raise the wheel clear of
the ground. Remove the wheel bolts and
lift off the wheel.
Car care
Clean any rust or dirt from the contact sur-
faces between the wheel and brake disc
5 Clean any rust or dirt from the contact
surfaces between the wheel and brake
disc. Do not wipe away the grease in the
wheel hub.
221