Cadillac BLS Owner's Manual page 200

460_OM_MY09.book Page 200 Wednesday, April 2, 2008 10:32 AM
200 Car care
Dome light, rear
1 Remove the entire overhead panel:
ease out the trailing end first, and then
both sides of the front edge.
2 Fit the new bulb.
Number plate lighting
1 Undo the two screws and remove the
lens.
2 Fit the new bulb.
3 Make sure the seal on the lens is
correctly seated.
4 Screw the lens in place.
Glove compartment lighting 3
1 Release one edge of the lamp fitting
using a screwdriver.
2 Fit the new bulb.
3 Insert the connector side first when
refitting the lamp.