Cadillac BLS Owner's Manual page 196

460_OM_MY09.book Page 196 Wednesday, April 2, 2008 10:32 AM
196 Car care
Position light bulb
Position light and front direction
indicator
1 Remove the entire lamp fitting from the
body before bulb replacement. See
page 193.
2 Twist the bulb holder anticlockwise and
take out the bulb.
3 Fit the new bulb.
4 Refit the lamp fitting. See page 194.
Direction indicator bulb
Side-mounted direction indicator
1 Slide the lamp fitting forward so that its
rear end can be pulled out.
2 Turn the bulb holder anticlockwise and
withdraw it from the lamp fitting. Change
the bulb.
3 To fit, first engage the two catches on
the rear edge of the lamp fitting with the
edge of the opening. Then press in the
front edge of the lamp fitting so that the
groove in the spring engages the plastic
edge.