Cadillac BLS Owner's Manual page 122

460_OM_MY09.book Page 122 Wednesday, April 2, 2008 10:32 AM
122 Interior equipment
Cargo guard 3, Wagon
NOTICE
Do not place any objects on the extended
cargo guard. It is designed to shield
against view and not for storage.
To fit
1 1 Hold the cartridge so that the extend-
ible part faces backward.
2 Position the cartridge over the pin (1) on
the left and right-hand sides. Press the
cartridge down and rotate it slightly for-
ward until a click is heard.
3 Check the fitting by pulling the cartridge
up, it should now be fitted firmly.
WARNING
A cassette that is incorrectly fitted can
detach and cause personal injury in the
event of a collision, heavy breaking or
similar.
Fitting the cargo guard
1 Pin on which the cargo guard is fitted
2 Handle for removing the cargo guard
To remove
1 Retract the cargo guard into the car-
tridge.
2 Pull the handle (2) back and lift up the
cartridge. Repeat this on the other side.
Opening the cargo guard
Opening the cargo guard
The cargo guard can be opened halfway in
order to facilitate loading objects into the
luggage compartment (and to avoid
stretching in over the luggage compartment
to reach the cargo guard).
1 Open the tailgate.
2 Press the rear lip of the cargo guard
down, e.g. with an elbow. The cargo
guard now opens halfway so that
objects can be more easily loaded into
the luggage compartment.
3 Pull the cargo guard down to the lower
position.