Cadillac BLS Owner's Manual page 215

460_OM_MY09.book Page 215 Wednesday, April 2, 2008 10:32 AM
Malfunctions
Tyre pressure system
failure. Contact service.
The above message is shown on the DIC if:
• a wheel without pressure sensor has
been fitted (e.g. spare wheel)
• one, two or three pressure sensors are
broken or missing
• a fault has arisen in the receiver
• a system error has arisen
The above messages are not shown if sen-
sors are missing in all wheels. It is then
assumed that winter wheels without sen-
sors have been fitted for example.
Removing a tyre
Remove the tyre with a tyre machine. It is
important to follow the instructions for the
tyre machine as well.
• Do not fit the tyre tool in an area ±10° from
the valve.
• Start removing opposite the valve.
• Remove the rear side first.
Car care
Fitting a tyre
Fit the tyre with a tyre machine. It is impor-
tant to follow the instructions for the tyre
machine as well.
• Start to fit about 20° after the valve.
• Finish fitting before an area 20° from the
valve.
• Do not inflate the tyre to pressure higher
than 7 bar (102 psi).
215