Lan Connection Status Display (Function Code 33) - Brother DCP-7055 Service Manual

1.4.12 LAN connection status display (Function code 33)

<Function>
This function allows you to check the status of the wired LAN connection. The display items
are shown in the table below.
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
<Operating Procedure>
(1) Press the 3 button twice in the initial state of the maintenance mode. In the case of the
model without the numeric keys; Press the
appears on the LCD. Then press the OK button.
(2) The display items in the table above are displayed.
(3) Press the Stop/Exit button to return to the machine to the initial state of the maintenance
mode.
LCD LAN connection status
100BASE-T Full Duplex
100BASE-T Half Duplex
10BASE-T Full Duplex
10BASE-T Half Duplex
Not connected.
or button. The "MAINTENANCE 33"
5-18
Confidential