Eeprom Customizing (User-Accessible) (Function Code 52) - Brother DCP-7055 Service Manual

1.4.15 EEPROM customizing (User-accessible) (Function code 52)

<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
Note:
• This function is applicable to France and surrounding countries, Pan-Nordic, East
Europe, Oceania and Iberia areas only.
<Operating Procedure>
(1) Press the Menu, Start and Menu buttons in this order in the ready state.
The "0" will appear on the LCD.
(2) Press the 5 and 2 buttons in this order. In the case of the model without the numeric
keys; Press the
press the OK button.
The "Set Country/Press OK" will appear on the LCD.
(3) Press the OK button. The country name will appear on the LCD.
Note:
• The country name indicated on the LCD varies depending on the area (code input in
Function code
Belgium Germany
Netherlands
België / Deutschland France
Belgique
Nederland österreich België /
(4) Press the
the OK button while the country name is being indicated. The EEPROM is customized,
and the machine returns to the ready state.
or button. The "MAINTENANCE 52" appears on the LCD. Then
74) as shown in the table below.
France and
surrounding
Austria
countries
Australia Norge
New
Belgique Zealand
Nederland
or button to display the country name where the machine is used. Press
Oceania Pan-Nordic Iberia
España österreich
Suerige Portugal Ceska
Suomi
Danmark
Others
5-23
South Africa
East Europe Turkey
Gulf
South Africa
Türkiye
republika
Magyarorazág Others
Polska
România
Slovensko
Others
Confidential