Low Voltage Power Supply Pcb Assy - Brother DCP-7055 Service Manual

9.20

Low voltage power supply PCB ASSY

(1) Remove the FG spring front chute from the LV shield plate cover and the front chute
ASSY.
(2) Release the hook part of the FG wire under R from the LV shield plate cover.
(3) Remove the three taptite bind B M4x12 screws, the screw pan (S/P washer) M3.5x6
screw and the screw pan (S/P washer) M3x12DB screw to remove the LV shield plate
cover.
Main frame R ASSY
FG spring front chute
Screw pan (S/P washer) M3x12DB
Taptite bind B M4x12
Assembling Note:
• Hang the FG spring front chute on the guide of the main frame R ASSY.
Guide
FG wire under R
Screw pan (S/P washer) M3.5x6
Taptite bind B M4x12
Fig. 3-69
3-83
LV shield plate cover
Confidential