Paper Jam - Brother DCP-7055 Service Manual

3.9.3 Paper jam

■ Paper jam in the ADF cover (Error code A3, etc)
User Check
• Check whether the document does not use the paper which is thinner than the
specification.
• Check whether length does not use paper equal to or less than 147.3 mm.
Step
Foreign object inside the area
1
around ADF cover
Harness connection failure of
2 document scanning position
detection sensor
Document scanning position
3
detection sensor malfunction
4 Breakage of the drive gear
■ Paper jam in the ADF (Error code A3, etc)
Step
Foreign object inside ADF
1
Document scanning position
2 detection actuator catching on some
position
Document scanning position
detection sensor malfunction
3
4 Document feed roller failure
5 Breakage of the drive gear
■ Paper jam in the ADF (Error code A3, etc)
Step
Foreign object around paper eject
1
Breakage of the drive gear
2
Eject roller failure
Cause
Cause
Cause
2-94
Remedy
Remove foreign objects inside the area
around the ADF cover, if any.
Check the harness connection of the
document scanning position detection
sensor and reconnect it.
Replace the document scanning position
detection sensor PCB ASSY.
Replace the ADF unit.
Remedy
Remove foreign objects inside the ADF, if
any.
Correct catching of the document
scanning position detection actuator.
Check the sensor performance following
the procedure described in
code 32".
If any problem occurs, replace the
document scanning position detection
sensor PCB ASSY.
Replace the document feed roller.
Replace the ADF unit.
Remedy
Remove foreign objects around the paper
eject, if any.
Replace the ADF unit.
"Function
Confidential