High Voltage Power Supply Pcb Assy - Brother DCP-7055 Service Manual

9.22

High Voltage Power Supply PCB ASSY

(1) Remove the flat cable from the guides of the main frame L ASSY, and disconnect the
connector from the high voltage power supply PCB ASSY.
(2) Remove the taptite bind B M4x12 screw.
(3) Release the hooks to remove the high voltage power supply PCB ASSY.
Front cover sensor lever
High voltage power
supply PCB ASSY
Taptite bind B M4x12
Assembling Note:
• Assemble the front cover sensor lever after assembling the high voltage power supply
PCB ASSY.
Flat cable
Guide
Flat cable
Hook
Hooks
Fig. 3-74
3-87
Guide
Main frame R ASSY
Confidential