Paper Eject Sensor Pcb Assy - Brother DCP-7055 Service Manual

9.35

Paper Eject Sensor PCB ASSY

(1) Remove the taptite cup S M3x6 SR screw and the two taptite bind B M4x12 screws.
(2) Release the hooks to remove the main PCB shield.
Hook
Assembling Note:
• When assembling the main PCB shield, insert the flat cable of the paper eject sensor
PCB ASSY into the hole of the main PCB shield.
• When assembling the main PCB shield, tighten the two taptite bind B M4x12 screws in
numerical order written in the plate.
Taptite bind B M4x12
2
Taptite cup S M3X6 SR
1
Main PCB shield
Fig. 3-93
3-105
Hook
Confidential