Initialization Of Eeprom Of Main Pcb Assy (Maintenance Mode: Code 01); Setting By Country (Maintenance Mode: Code 74); Setting The Serial Number - Brother DCP-7055 Service Manual

1.2

Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01)

Initialize the EEPROM in accordance with
code 01, 91)" in Chapter
1.3

Setting by Country (Maintenance Mode: Code 74)

Make appropriate settings by country in accordance with
code 74)" in Chapter
1.4

Setting the Serial Number

Note:
• The printer driver of the relevant model must have been installed.
<Procedures>
(1) Check that the machine is in the ready state, and then connect the USB cable.
(2) Double-click the "brmainte.exe" file (maintenance utility) which has been copied in the
temporary folder to start.
(3) Select "Input information" from Menu.
(4) Select the applicable model name.
(5) Check the port (USB) that the machine is connected through.
(6) Click "Serial No." in the lower box. Enter the serial number (the fifteen digits) of the
machine into the box on the right hand side and click the OK button.
A confirmation window opens and shows the serial number. Check that it is correct and
click the OK button.
Memo:
• Refer to "APPENDIX 1 SERIAL NUMBERING SYSTEM"
number of the machine.
"1.4.1 EEPROM parameter initialization (Function
5.
5.
4-3
"1.4.20 Setting by country (Function
to know how to read the serial
Confidential