Brother DCP-7055 Service Manual page 277

[2] Printout of worker switch data (Function code 11)
<Function>
The machine prints out the setting items of the worker switches and their contents specified.
<Operating Procedure>
(1) Press the 1 button twice in the initial state of the maintenance mode. In the case of the
model without the numeric keys; Press the
appears on the LCD. Then press the OK button. The "PRINTING" will appear on the LCD.
(2) Printing of CONFIGURATION LIST (see the figure below) starts, and when printing is
finished, the machine beeps for one second and returns to the initial state of the
maintenance mode.
Note:
• The function names specific to multi-function machines are printed in
CONFIGURATION LIST for convenience of program development. They are invalid in
this product and should be ignored.
or button. The "MAINTENANCE 11"
Fig. 5-3
5-11
Confidential