Fan Motor 60 Assy - Brother DCP-7055 Service Manual

9.21

Fan Motor 60 ASSY

(1) Disconnect the connector of the fan motor 60 ASSY from the high voltage power supply
PCB ASSY.
(2) Remove the harness of the fan motor 60 ASSY from the guides of the main frame R
ASSY.
(3) Release the hooks to remove the fan motor 60 ASSY.
High voltage power supply PCB ASSY
Hook
Label
Assembling Note:
• When assembling the fan motor 60 ASSY, attach the fan motor 60 ASSY after inserting
the harness into the guides of the main frame R ASSY.
• When assembling the fan motor 60 ASSY, place it so that the attached label faces
outwards.
• When assembling the fan motor 60 ASSY, secure the harness to the position of figure
above with the tape.
Hook
Fan motor 60 ASSY
Fig. 3-73
3-86
Connector
Guides
Tape
Main frame R ASSY
Confidential