Brother DCP-7055 Service Manual page 66

■ Error code 25
These errors do not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
Print Unable 25
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 26
Print Unable 26
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 27
Print Unable 27
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 28
Print Unable 28
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 29
Print Unable 29
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 2A
Print Unable 2A
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 2B
Print Unable 2B
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
Error code 2C
Print Unable 2C
Turn the power off and then back on again.
Error, which cannot be specified, occurs.
2-29
Confidential