Removing the Power Supply
FIGURE 5-3
3. Squeeze the power supply connector clip to disconnect the following cables from
the motherboard (
P2 power cable on the motherboard (J22)
P1 power cable on the motherboard at (J28)
P5 power supply signal cable on the motherboard (J45)
4. Disconnect the following cables from the hard drive backplane
P3 hard drive backplane power cable on the hard drive backplane (J2)
Hard drive signal cable to J4 on the hard drive backplane. (This cable also serves
as a cable clip over other cables).
5. Turn the captive screw that secures the power supply to the chassis (
6. Using the handle, push the power supply out of the back of the chassis.
).
FIGURE 5-3
Chapter 5 Replacing Chassis Components
).
FIGURE 5-3
5-5