10. Install the PCI cards and the DIMMs.
Refer to:
"Installing a PCI Card" on page 3-18
"Replacing the DIMMs" on page 3-3
11. Inspect the motherboard to verify that:
Cable connections are tight and cable clips are secured.
DIMMs are properly installed.
NVRAM is tight in the socket.
PCI cards are properly seated and secured.
12. Reassemble the workstation, power on the system, and verify the motherboard
installation.
Refer to "Finishing Component Replacement" on page 6-1.
3-26
Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006