Table of Contents
Advertisement
To change a parameter value, use the setenv command. For example:
ok setenv diag-switch? true
This example enables diagnostics.
Note – Parameters that end with a question mark (?) can only be set true or
false.
10.2.2
Configuration Parameter Default Values
Typing set-defaults resets all parameters to their default values.
the NVRAM configuration parameters, the default values, and a description.
TABLE 10-3
Parameter
asr-policy
test-args
diag-passes
local-mac-address?
fcode-debug?
scsi-initiator-id
oem-logo
oem-logo?
oem-banner
oem-banner?
ansi-terminal?
screen-#columns
screen-#rows
ttyb-rts-dtr-off
ttyb-ignore-cd
NVRAM Configuration Parameter Default Values
Default Value
Description
Reserved.
normal
Arguments that configure OpenBoot Diagnostics.
Number of passes that diagnostics are to make before
1
continuing to boot.
Value of true means to use the MAC address within the
true
motherboard.
Value of false disables debugging of Fcode.
false
Identifying number of any SCSI host bus adapter.
7
Bitmap of a custom OEM logo.
no default
Value of false disables use of a custom logo.
false
Text of a custom OEM banner.
no default
Value of false disables use of a custom banner.
false
Value of true enables the terminal emulator to interpret
true
ANSI escape sequences.
Number of character columns displayed on the console.
80
Number of character rows displayed on the console.
34
Value of false disables hardware handshaking for ttyb
false
Value of true ignores carrier detect for ttyb.
true
lists
TABLE 10-3
Chapter 10 NVRAM
10-5
Advertisement
Table of Contents
